Product Description

• Working principle
  Working of special ceramic filter is based on the principle of the micron pores. Which takes the ceramics with micron pores as the filtering medium, by utilizing the solid liquid separating device designed by adopting the principle of capillary function owe to their big quantity of the micron pores and the round disk filter working under negative pressure, making use of the special feature of the micron pores ceramic plate through which the water can go and air can not pass vacuuming the inner chamber of the ceramic plate and establish the press difference with the outside of the plate, and the suspending material and be absorbed on the ceramic plate under the negative pressure while the solid material stay on the surface of the plate because they can not go through the micron pores cermic plate, and because of the existing of the vacuum pressure difference and the hydrophilicity of the ceramic plate, the liquid can be discharged or rcycled by passing through the plate and entering the gas-liquid districution device(vacuum drum) and thus achieve the goal of the solid-liquid separating.
  One Operating circle of the rotating parts(ceramic plate) can be divided into four sections: Slurry section, drying section, material discharge section, cleaning, and these four sections cycling continously during the running of the filter.
  
  2.Product  Feature
  1.High efficient.Energy saving and Environmental protection
  2.Stable performance
  3.A high degree of intelligence
  4.Filter board supervisor performance
  5.Distributing valve device
  6.Ultrasonic cleaning system
  7.Stirred device
  8.Backwashing system
  9.Automatic drainage system
  *0.Special cleaning device

Q: Are you a factory ? 
A:Yes,we are factory, which was established in ***6.
We focus on providing expert service including design, manufacture, installation & maintenance for the logistic industries & warehouse equipment.
Q: Terms of Payment: 
A:*0% of the total amount by TT as deposit, the balance to be paid by TT or L/C at sight before the machines leaving seller' factory.
**0% irrevocable L/C at sight.
 Q:Time for preparation of goods: 
A:The above machines shall be ready for delivery during *5 days from the date of receiving the deposit/LC, excluding the time of waiting for shipment. If there is any delay of delivery caused by seller, 3‰ of the total amount shall be paid to buyer each day, but this amount shall not exceed the amount of deposit; if the delay is caused by buyer, 3‰ of the total amount shall be paid to seller each day, but this amount shall not exceed *0% of total value of machines.       
 Q:Guarantee period: 
   A:The guarantee period for the above machines is twelve months from the date of putting into use, but not exceeds twenty-four months after the machines leaving seller's factory. It is not applicable for quick wear parts.
Q: May I know the status of my order?
A: Yes. We will send you information and photos at different production stage of your order. Every step will be send to you in time.
Q: Can I customize shelving or racking at my own size?
  A: Sure.
Q: If i need the complete mineral processing line. is Baite able to help us build it?